Table of Contents
Advertisement
Chapter 3
Maintenance
Troubleshooting the PXI-1000
PXI-1000 User Manual
Refer to Table 3-1 to troubleshoot the PXI-1000 mainframe. The table lists
possible causes for power failure and recommends ways to correct the
problem.
Possible Cause
PXI-1000 mainframe is not
connected to power source.
Power switches are not
switched on.
Remote inhibiting input on
the rear panel of the
mainframe is active.
Circuit breaker is tripped.
Power supply has failed.
Table 3-1. Troubleshooting
Make sure that the PXI-1000 is connected
to a live electrical outlet. Try operating
another piece of equipment from this
outlet.
Set the rear (main) power switch and the
front (standby) power switch to the On
position.
Deactivate your system's remote
inhibiting control.
Reset the circuit breaker. Refer to the
Resetting the AC Mains Circuit Breaker
section in this chapter.
Contact National Instruments.
3-4
What to Do
© National Instruments Corporation
Advertisement
Table of Contents
