Maintenance; Service Interval; Preparation; Cleaning - National Instruments PXI PXITM -1000 User Manual

National instruments pxi user manual pxitm -1000
Table of Contents

Advertisement

Maintenance

Service Interval

Preparation

Caution
Many components within the mainframe are susceptible to static discharge
!
damage. Service the mainframe only in a static-free environment. Observe
standard handling precautions for static-sensitive devices while servicing the
mainframe. Always wear a grounded wrist strap, or equivalent, while servicing
the mainframe.

Cleaning

Caution
Always power-off the mainframe (using the main power switch on the rear of the
!
mainframe) and disconnect the power cord before cleaning or servicing the
mainframe.
© National Instruments Corporation
This chapter describes basic maintenance procedures you can perform on
the PXI-1000 mainframe.
Clean the mainframe fan filters at a maximum interval of six months.
Depending upon the amount of use and ambient dust levels in the operating
environment, the filters may require more frequent cleaning.
Clean dust from the mainframe exterior (and interior) as needed, based on
the operating environment. Periodic cleaning increases reliability.
The information in this section is designed for use by qualified service
personnel. Read the
For Your Safety
before attempting any procedures in this chapter.
Cleaning procedures consist of exterior and interior cleaning of the
mainframe and cleaning the fan filters. Refer to your module user
documentation for information on cleaning the individual CompactPCI
or PXI modules.
section at the beginning of this manual
3-1
3
PXI-1000 User Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pxi-1000

Table of Contents