MSI MS-6764 User Manual page 77

Load High Performance/BIOS Setup Defaults
The two options on the main menu allow users to restore all of the BIOS
settings to High Performance defaults or BIOS Setup defaults. The High
Performance Defaults are the values set by the mainboard manufacturer for
the best system performance but probably will cause a stability issue. The
BIOS Setup Defaults are the default values also set by the mainboard
manufacturer for stable performance of the mainboard.
When you select Load High Performance Defaults, a message as below appears:
Pressing 'Enter' loads the default BIOS values that enable the best system
performance but may lead to a stability issue.
MSI Reminds You...
The option is for power or overclocking users only. Use of high
performance defaults will tighten most timings to increase the
system performance. Therefore, a high-end system configuration
is a must, which means you need high-quality VGA adapter, RAM
and so on. We don't recommend that users should apply the
high performance defaults in their regular systems. Otherwise,
the system may become unstable or even crash. If the system
crashes or hangs after enabling the feature, please CLEAR CMOS
DATA to resolve the problem. For more information, refer to
"Clear CMOS Jumper:JBAT1" in Chapter 2.
When you select Load BIOS Setup Defaults, a message as below appears:
Pressing 'Enter' loads the default values that are factory settings for stable
system performance.
BIOS Setup
3-31