MSI MS-6764 User Manual page 42

To Attach the Optional USB 2.0 Ports:
1. Take out the USB2.0 Bracket and D-Bracket™ 2 (optional accessories
upon request).
2. Locate the blue USB pinheader (JUSB2) and yellow USB pinheader
(JUSB3) on the motherboard.
3. Connect the USB 2.0 bracket to the blue JUSB2 pinheader, and D-Bracket™
2 to the yellow JUSB3 pinheader.
Connected to JUSB2 (the
blue USB pinheader)
Connected to JLED
4. Place the USB 2.0 bracket and D-Bracket™ 2 into the appropriate slot of
the system case.
This USB 2.0 port will not function when a Bluetooth module
is connected to the onboard Bluetooth pinheader JBT1. If no
Bluetooth function is applied, remove the sticker to utilize this
port.
Connected to:
JUSB3 (the yellow USB pinheader)
Hardware Setup
USB 2.0 Bracket
D-Bracket™ 2
2-23