MSI MS-6764 User Manual page 65

CPU Critical Temperature
If the CPU temperature reaches the upper limit preset in this setting, the warning
mechanism will be activated. This helps you to prevent the CPU overheating
problem.
Power Button Function
This feature sets the function of the power button. Settings are:
On/Off
Suspend
After AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
Power Off
Power On
Last State
Set WakeUp Events
Press <Enter> and the following sub-menu appears.
Wake Up On Ring/PME, Resume On KBC (with "Wake-Up Key"
and "Wake-Up Password"), Resume On PS/2 Mouse
These fields specify whether the system will be awakened from power
saving modes when activity or input signal of the specified hardware
peripheral or component is detected. Settings: Enabled, Disabled.
The power button functions as normal power off button.
When you press the power button, the computer enters
the suspend/sleep mode, but if the button is pressed for
more than four seconds, the computer is turned off.
Leaves the computer in the power off state.
Reboots the computer.
Restores the system to the previous status before power
failure or interrupt occurred.
BIOS Setup
3-19