Other Items Required - THUNDER TIGER Raptor 90 3D Assembly And Maintenance Manual

RADIO SET
Receiver
Transmitter
(helicopter type, 6 or
High Speed/Torque Servo x 4
more channels)
Rudder Servo x 1
ENGINE
Glow Plug
Heli Engine (90size)
9609 PRO-90H(R)
1.5V Glow Starter
12V Battery
(1.2V~1.5V)
Remote Glow Plug
Extension
TOOLS REQUIRED FOR ASSEMBLY
Screw Driver Needle Nose Pliers
Instant Glue
Hobby Knife
Tools for Assembly
The Raptor 90 3D is designed for easy maintenance using standard hobby t ools. Please only use genuine Thunder Tiger parts.
Please keep the model clean and well tuned. It will provide you with long lasting pleasure in return.

OTHER ITEMS REQUIRED

Battery
Heading Lock
Gyro
Fiberglass or Carbon Rotor Blade
Glow Fuel(15%-30%)
Hi-torque 12V Electric starter
Fuel Pump
Rubber Band
(Included)
Glow Plug Wrench
Open End Wrench
Ball Link Pliers
5.5mm
7mm
Grease
Blue Loctite
4
Engine System
Use a high quality 90 size 2-stroke
model helicopter engine, such as the
Thunder Tiger TT PRO-90H, OS 91
SZ-H, YS 91 ST, Webra 91, or
Switch harness
equivalent. Please beware, some
engines may not fit because of their
shape and size. The Raptor 90 3D
kit comes with a cooling fan hub to fit
the TT PRO-90H, OS 91 SZ-H, Webra
91.
We recommend a high quality muffler
or tuned exhaust system designed to
fit on the left side of the model.
Rotor Blades
It is important to use main rotor blades
that are of high quality and suitable
for your flying style. If fiberglass or
carbon graphite blades are used, the
length should be between 680 and
710 mm. Blade weight should be
between 170 and 200 grams.
Extended 6mm Hex
Starter System
Starting Tool
To start the engine, it is necessary to
use an electric starter with a 6mm
shaft extension. The starter and the
6 mm extension are available from
Foam
Thunder Tiger, the part numbers are
No.2675 and No.3801.
Use a strong high torque 12 volt
electric starter which is designed for
models.
Diagonal Pliers
Epoxy
Metric
4-way Wrench
Scissors
5.5mm
Hex Wrench
(Included)
Socket Drivers
5.5mm
7mm
8mm
10mm
7mm
8mm