Installation Of Receiver And Gyro - THUNDER TIGER Raptor 90 3D Assembly And Maintenance Manual

5-3
Installation of Receiver & Gyro
No. Material No. Description
1 **** Switch
2 **** Receiver Battery
3 **** Receiver
Install the receiver and receiver battery. Even though the receiver and battery can be attached to the helicopter tray by using
double sided foam tape, but it is better to wrap the receiver and battery separately using half inch or 10 mm thick foam. Then
secure them to the tray using six to eight rubberbands, or Velcro bands.
(6)
Qty.
1
1
1
(4)
No. Material No. Description
4 **** Gyro
5 BK0106 Foam
6 BE1052 Antenna Pipe
The optional Thunder Tiger Remote Glow Plug Adaptor (#3803)
is recommended as shown, making starting easy without the
removal of your canopy.
38
(1)
(3)
(2)
(5)
Qty.
2
1