Remote Control Battery Installation - Christie LHD700 Quick Reference Manual

Remote Control Battery Installation

1
Open the battery
compartment lid.
To ensure safe operation, please observe the following precautions :
● Use two (2) AAA or LR03 type alkaline batteries.
● Always replace batteries in sets.
● Do not use a new battery with a used battery.
● Avoid contact with water or liquid.
● Do not expose the remote control to moisture or heat.
● Do not drop the remote control.
● If the battery has leaked on the remote control, carefully wipe the case clean and install new
batteries.
● Risk of an explosion if battery is replaced by an incorrect type.
● Dispose of used batteries according to the instructions or your local disposal rule or guidelines.
Remote Control
②
③
④
⑤
⑥
⑦
① STAND-BY button
Turn the projector off.
② SIGNAL EMISSION indicator
Light red while a signal is being sent from the
remote control to the projector.
 Note:
To ensure safe operation, please observe the
following precautions:
– Do not bend, drop, or expose the remote
control to moisture or heat.
– For cleaning, use a soft dry cloth. Do not
apply benzene, thinner, spray, or any chemical
material.
020-000424-01 Rev.1 (11-2011)
2
Install new batteries into
the compartment.
①
⑫
⑪
⑩
⑨
⑧
11
Two AAA size batteries
For correct polarity (+ and
–), be sure battery terminals
are in contact with pins in
compartment.
③ ON button
Turn the projector on.
④ SHUTTER button
Close and open up the built-in shutter.
⑤ MENU button
Open or close the On-Screen Menu.
⑥ POINT ▲▼◄► buttons
– Select an item or adjust the value in the
On-Screen Menu.
– Pan the image in Digital zoom + mode.
⑦ L-CLICK button
Act as the left mouse button for wireless mouse
operation.
⑧ R-CLICK button
Act as the right mouse button for wireless
mouse operation.
⑨ SELECT button
– Execute the selected item.
– Expand or compress the image in the Digital
zoom mode.
⑩ MOUSE POINTER button
Move a pointer of the projector or a pointer for
wireless mouse operation.
⑪ AUTO PC button
Automatically adjust the computer image to its
optimum setting.
⑫ INPUT button
Select a signal.
3
Replace the
compartment lid.