Remote Control Operating Range - Christie LHD700 Quick Reference Manual

Remote Control
⑬
⑭
⑮
⑯
⑰
⑱
⑬ P-TIMER button
Operate the P-timer function.
⑭ IMAGE SEL. button
Operate the image selection function.
⑮ FREEZE button
Freeze the picture on the screen.
⑯ LENS SHIFT button
Select the Lens Shift function.
⑰ ZOOM ▲▼ buttons
Zoom in and out the images.
⑱ PIP button
Operate the Picture in Picture function.
⑲ ON/OFF switch
When using the remote control, set this switch
to "ON". Set it to "OFF" for power saving when
it is not in use.
⑳ WIRED REMOTE jack
Connect the remote control cable (not supplied)
to this jack when using as a wired remote
control.
㉑ FILTER button
Scroll the filter.

Remote Control Operating Range

Point the remote control toward the projector (to Infrared Remote Receivers) when pressing the
buttons. Maximum operating range for the remote control is about 16.4' (5 m) and 60 degrees in front,
back and top of the projector.
Infrared Remote Receivers are provided in front, back and top of the projector. You can conveniently
use all of the receivers.
㉙
㉘
㉗
㉖
㉕
㉔
㉓
㉒
㉑
⑲ ⑳
㉒ FOCUS buttons
Adjust the focus.
㉓ INFO. button
Display the input source information.
㉔ KEYSTONE button
Correct keystone distortion.
㉕ D.ZOOM button
Select the Digital zoom +/- mode and resize the
image.
㉖ INPUT 1- 3 buttons
Select an input source (INPUT 1 – INPUT 3) .
㉗ IMAGE ADJ. button
Operate the image adjustment function .
㉘ SCREEN button
Select the screen size.
㉙ POINTER button
Act as the On-Off switch for the Pointer.
㉚ NUMBER buttons
Act as number buttons. Use these buttons
when setting the remote control codes or when
entering the PIN code numbers.
12
㉚
For PIN code
and remote
control code.
020-000424-01 Rev.1 (11-2011)