6-５-１ Ptz Protocol Setup; 6-５-２ Camera Id Setup; [Figure 6-45. Ptz Window]; [Figure 6-46. Ptz Protocol Window] - Veilux VR-412D1 Operating Instructions & User Manual

Camera Displays Channel Nos. 1 ~ 4.
Protocol Sets the protocol for communicating with the PTZ camera.
Camera ID ID set up in the PTZ camera.
Transmission Communication speed (must be the same as that defined in the camera manual).
Rate
Time interval required to change to the assigned screen between the Preset
Preset Duration
defined in the Tour feature and the next Preset (5 ~60 seconds).
Tour Sets the Tour feature (Tour 1 and Tour 2).
6-５-１ PTZ Protocol Setup
PTZ protocol refers to the rule for communicating with the PTZ camera.
① From the PTZ Setup menu, select the PTZ protocol for the channel you want to set using the arrow
keys and the Select button. VR-412C / VR-412D1 supports 22 company's PTZ protocol.
② On the selection window, select the PTZ protocol using the arrow keys and the Select button.
6-５-２ Camera ID setup
Camera ID refers to the address used for communicating with the PTZ camera.
※ The camera ID must be the same as the ID set in the PTZ camera.
※ Different methods are used to set the address of the PTZ camera depending
on the camera manufacturer or model. Refer to the camera manual of each
manufacturer for the correct information.
① From the PTZ Setup menu, select the camera ID for the channel using the arrow keys and the Select
button.
② In the selection box, select the camera ID using the arrow keys and the [Select] button.
Veilux VR-412D1 & VR-412C Compact DVR's
www.veilux.net

[Figure 6-45. PTZ Window]

[Figure 6-46. PTZ Protocol Window]

61
Operating Instruction & User's Guide