Table of Contents
Advertisement
only used to back up data. The user can execute only the {New} command.
Depending on the storage type, the storage is used only for {Direct} or
{Backup} purposes.
(2) Configuration of the local storage device
Model
Serial
Location
Capacity(T/F)
Status(SW/HW)
Active
Connected to storage or backup device; currently saving the data.
Online
Only connected to storage or backup device.
Offline
Not connected to storage or backup device.
Healthy
Connected to storage or backup device; functions normally.
Warning
Connected to storage or backup device, but error was detected; in this case,
data storing or backup cannot be made (for more information, see the
description below).
Fault
Not connected to storage or backup device; cannot perform data saving or
backup.
1. Fault State : The storage device is completely damaged, and none of the S/W
operations can be performed. The fault state is not related to a DVR problem. The DVR
has detected the fault and stopped the recording.
2. Warning State : The storage device has a physical error that can be corrected by the
storage device or by the DVR. If the error is not taken care of, however, the storage device
is likely to be damaged (and shift to fault state). Backing up data in the corresponding
storage device and replacing the device with a normal one are strongly recommended.
3. If there is an active storage device with a warning or a fault, a message is displayed on
the upper left part of the screen
Model name of the storage device.
Serial number of the storage device.
Physical location of the storage device.
Storage device capacity (T: Total; F: Free)
Storage device status (SW: Software; HW: Hardware)
※ There are three software status types.
※ There are three hardware status types.
58
Veilux VR-412D1 & VR-412C Compact DVR's
www.veilux.net
Operating Instruction & User's Guide
Advertisement
Table of Contents
