6-２-４ Event; [Figure 6-34. Frame Rate Re-Setup Window] - Veilux VR-412D1 Operating Instructions & User Manual

① Select (Frame Rate).
② In adjusting the frame rate, setting the frame rate to be higher than the maximum frame rate causes a
menu to be displayed as shown in [Figure 6-32].
③ The red-colored channel is currently being set as shown in [Figure 6-32]. Any unused channel will be
deleted first.
⑥ Audio
Used to set the recording for the external audio input linked to the system. Only VR-412D1 is supported.
6-２-４ Event
① Motion
This function detects the movement of images. Detection settings include {Off} / {Partial} / {All} /
{Sensitivity}. The default value is Off, however.
(1) All
Detects all movements of images each channel. Record only for the time set at {Recording}  {Event} 
{Post-Event}.
① Select the channel to be set up at {Recording}  {Event}  {Motion Detection} using the arrow
keys and the Select button.
② Select {All} on the selection window.
(2) Partial
Detects movements of images on a certain designated area in each channel. Record only for the time set at
{Recording}  {Event}  {Post-Event}.

[Figure 6-34. Frame Rate Re-Setup Window]

50
Veilux VR-412D1 & VR-412C Compact DVR's
www.veilux.net
Operating Instruction & User's Guide