Roland versaArt RE-640 Setup Manual page 49

w
SUBNET MASK
000 . 000 . 000 . 000
x
SUBNET MASK
255 . 000 . 000 . 000
w
y
Repeat and
z
SUBNET MASK
255 . 255 . 255 . 000
{
W1200mm
SETUP SHEET
If you use the computer and the machine one-on-one basis, this will complete the settings to make on the
printer. Go on to Step 3.
If you need to set the gateway address, then go on to the procedure following this one.
3.
Set the gateway address.

NETWORK
IP ADDRESS

NETWORK
GATEWAY ADDR.
w
GATEWAY ADDR.
000 . 000 . 000 . 000
x
GATEWAY ADDR.
255 . 000 . 000 . 000
w
y
Repeat and
z
GATEWAY ADDR.
255 . 255 . 255 . 255
{
W1200mm
SETUP SHEET
Press
[SUBNET MASK]: 255.255.255.000
Note: For the subnet mask, make the setting the same value as the one used
by the computer. Here, "255.255.255.000" is entered by way of example.
Press
x
to set the subnet mask.
When you finish making the setting, press
Press
Press
From the screen displayed in
Press
Press
[GATEWAY ADDR.]: 255.255.255.255
For the value to enter for your gateway address, consult your network ad-
ministrator. Here, "255.255.255.255" is entered by way of example.
Press
x
to set the gateway address numbers.
When you finish making the setting, press
Press
Press
to select the address number.
.
.
to go back to the original screen.
1. |
－
twice.
to select the address number.
.
.
to go back to the original screen.
7. Network Settings
.
, press twice.
.
47