Roland versaArt RE-640 Setup Manual page 43

}
Continuously, clean the print heads in the order of the slots 3 and 4, the slots 5 and 6,
and then the slots 7 and 8 as following the on-screen instructions.
Insert and remove the SOL INK cleaning cartridge and dummy cartridge from and into the slot with the
slot number indicated on the screen. If the slot number is incorrect, filling with ink will fail.
3.
Insert the ink cartridges of the respective colors.


w
x
6. ECO-SOL MAX ink model: Installing the Ink Cartridges
Insert the ink cartridges into the slots 7 and 8.
Check the cartridge-slot label to confirm that the ink cartridges are inserted
into the right place.
Label
surface
Insert the dummy cartridges to the slots 1 to 6.
With the same procedure of
tridges.
Press
Pull out the dummy cartridges from the slots 1 to 6.
Press
When having difficulty pulling out the dummy cartridges, insert the retainer used in the
2.- y
procedure
retainer, see the procedure
it easily by tilting it slightly forward.)
Gently shake the ink cartridges of the re-
spective colors before inserting them to
the slots.
Insert into the slot of the
Label matching color.
Cartridge-slot label
2.- y
.
.
into the slots to make the task easier. For instructions for use of the
2.- y
(When pulling out only the retainer, you can remove
insert the dummy car-
,
41