Roland versaArt RE-640 Setup Manual page 25


Attach the casters onto the stand legs.
Attach the casters to the end farther away from the stand stay. The casters have no particular front and rear
orientation. Tighten the bolts securely. (8 locations in total) Loose bolts may cause the stand to wobble.
Caster
Stand leg
w
Attach the arms to the stand.
Set the stand upright and fix the arms by tightening the bolts securely in the order given below. (12
locations in total for right and left)
Loose bolts may cause the stand to wobble.
Lightly tighten the bolts in the upper 4 locations. (8 locations in total for right and
left)
Lightly tighten the bolts in the 2 locations on the side. (4 locations in total for right
and left)
Fully tighten all the bolts to fix the arms completely.
Bolts
Arm (right)
Bolts
Bolts
Long
Short
Stand stay
Place the side with the
bolts to the front.
3. Assembling and Installing
Hexagonal wrench
Bolts
Bolts
Pipe
Caster
Hexagonal
wrench
Arm (left)
Bolts
23