Roland versaArt RE-640 Setup Manual page 42

6. ECO-SOL MAX ink model: Installing the Ink Cartridges
z
{
|
40
Pull out the SOL INK cleaning cartridges from the slots 1
and 2.
Insert the SOL INK cleaning cartridges into the slots 1 and
2.
Insert the cartridge straight down from the top, as far as it will go.
Following the on-screen instructions, repeat the process above
one more time.
Label
surface
Pull out the SOL INK cleaning cartridges from the slots 1 and 2.
Label
surface
Pull out the dummy cartridges from the slots 3 and 4.
Press .
Round hole
When having difficulty pulling out the dummy cartridges, insert the retainer used in the
2.- y
procedure into the slots to make the task easier. For instructions for use of the
2.- y
retainer, see the procedure
it easily by tilting it slightly forward.)
(When pulling out only the retainer, you can remove