Roland versaArt RE-640 Setup Manual page 26

3. Assembling and Installing
x
Place the machine on the stand.
Align the holes on the base surface of the machine to the protrusions of the arms. Tighten the bolts
securely. Loose bolts may cause the stand to wobble.
Fasten the back surface of the machine securely with the bolts. (4 locations in total
for right and left)
Fasten the base surface of the machine securely with the bolts. (4 locations in total
for right and left)
Bolts
Hexagonal
wrench
24
Align with the arms.
Bolts
Bolts
Bolts
Hexagonal
wrench