Roland versaArt RE-640 Setup Manual page 41

y
How to attach the retainer
Align the projection of the
retainer with the groove in
the cartridge slot.
6. ECO-SOL MAX ink model: Installing the Ink Cartridges
Insert the retainers to the slots 3 and 4.
As paying attention to the orientation of the round hole,
insert the dummy cartridges to the slots 3 and 4.
Insert the dummy cartridge straight as far as it goes.
Remove the retainers as holding the dummy cartridges with
one hand so that they will not come off.
In the same way, insert the dummy cartridges to the slots 5 and
6 and the slots 7 and 8 by repeating the steps
Press .
Retainer
Dummy Cartridge
Hold it with both hands and
push it down with sufficient
force along the groove.
CAUTION
Push the retainer from the
top.
If you hold the lower part of the
retainer when installing, you may
get your fingers pinched due to
installing force.
Round hole
Installation is
completed.
to .
39