VDO Cyclecomputing M3 WR Manual page 28

M3 WR
Settings – total values – total ride time
The next digit on the left starts to flash and is ready
to be set.
Press the BIKE button to set the value for this digit.
Press the SET button to confirm your setting.
Once you have set all four digits, confirm the setting again
by pressing the SET button.
The setting for the minutes is then opened.
Press the BIKE button to set the minutes.
Once the minutes have been set, confirm the setting
by pressing the SET button.
The response "Set OK" appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any further settings,
press and hold the SET button.
The settings menu closes.
The VDO M3 returns to function mode.
28