HP ENVY x360 Maintenance And Service Manual page 64

3. The touch screen display cable connects to the board at the bottom of the bezel. To disconnect the
touch screen display cable from the display bezel, pull the cable upward to disconnect.
NOTE:
809388-001 for FHD panels.
4. The display/webcam cable connects to the bottom of the display panel. To remove the display/webcam
cable:
NOTE:
FHD models.
a. Position the display bezel/display panel assembly upside-down.
b. Disconnect the display cable from the connector at the bottom of the display panel (1).
c. Disconnect the webcam cable from the webcam (2).
d. Remove the cable from the routing path and clips along the right side of the display bezel (3).
56 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
The touch screen display cable is available in the cable kit using spare part number
The display/webcam cable is available in the cable kit using spare part number 809388-001 for