HP ENVY x360 Maintenance And Service Manual page 62

CAUTION:
assembly can result in damage to the display assembly and other computer components.
5. Remove the display assembly from the computer (3).
If it is necessary to replace any of the display assembly subcomponents:
1. To remove the display panel and bezel from the display enclosure:
NOTE:
a. Remove the two screw covers (1).
b. Remove the two Phillips PM2.5×4.0 screws (2) that secure the enclosure to the display panel.
54 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Support the display assembly when removing the screws. Failure to support the display
The display enclosure is available using spare part number 812878-001.