System Board - HP ENVY x360 Maintenance And Service Manual

System board

NOTE: The system board spare part kit includes replacement thermal material.
Description
Intel Core i7-5500U processor and a non-Windows 8 operating system
Equipped with an Intel Core i7-5500U processor and the Windows 8.1 Standard operating system
Intel Core i5-5200U processor and a non-Windows 8 operating system
Equipped with an Intel Core i7-5200U processor and the Windows 8.1 Standard operating system
Before removing the system board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the top cover (see
5. Disconnect the battery.
NOTE: When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
●
WLAN module (see
●
Memory module (see
●
Heat sink (see
46 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Top cover on page
WLAN module on page
Memory module on page
Heat sink on page 51)
28).
37)
49)
Spare part number
809384-001
809384–501
809385-001
809385–501