Setup Menu; Date / Time - Silvercrest SCA 5.00 A1 63671 User Manual And Service Information

SilverCrest SCA 5.00 A1
Autoplay
This function allows you to play all captured photos in sequence
like a slideshow.
1. Perform steps 1 to 4 from "Photo Playback Menu" (see page
174).
2. Select "Autoplay" and press the confirmation button (7) to
confirm.
3. To stop the slideshow, press the confirmation button (7).

Setup Menu

The setup menu contains basic settings for your camcorder. These
include date and time, the button beep, the automatic power-off
delay time (power-saving function), the TV system for direct display
on a TV set, a formatting function for the internal memory or the
inserted SD memory card, a function for restoring the factory
defaults, menu language setting, and setting the mains frequency
for avoiding picture interference.
1. Open the display and then rotate it according to your needs.
The device powers on automatically.
2. Press the mode selector button (6) twice to display the setup
menu.
The menu offers 8 functions that you can select by using the
navigation buttons (10).
3. Use the navigation buttons (10) to select one of the settings and
then press the confirmation button (7) to confirm.
4. Use the navigation buttons (10) to adjust one of the possible
values and press the confirmation button (7) to confirm.
In the following we describe the available options:

Date / Time

Set the date and time (see also page 151 – Setting the Date and
Time).
The Menus
English - 177