Setting Up The Bobbin Thread Counter; Resetting The Piece Counter - Pfaff 3371-1 series Instruction Manual

Setting up
9

Setting up the bobbin thread counter

.08
TE
ON
VAL
800
TE
9

Resetting the piece counter

.09
In the sewing mode (basic position of the machine) the piece counter or the bobbin thread
counter can be displayed by pressing the menu key. (When the bobbin thread counter is
switched off, the piece counter is displayed - Selection under parameter 004) .
The piece counter counts from 0 onwards and differs from the bobbin thread counter in the
display through the upwards pointing arrow.
SET
9 - 8
With the machine in its basic position, select the input mode.
With the corresponding plus/minus key select parameter "004".
If required, enter the access code, see Chapter 11.04.01 Entering the access code.
P3 P4 P5
P1 P2
TE
No
004 OFF
With the corresponding plus/minus key switch on the bobbin thread counter.
P4 P5
P1 P2 P3
TE
No
004 ON
With the corresponding plus/minus key enter the number of workpieces to be sewn.
Conclude the input by pressing the TE key. (Machine changes to the sewing mode).
P4
P1 P2 P3 P5 P6
20 SET
Reset the piece counter with the corresponding plus/minus keys.
P6 P7 P8
P
C1
VAL
C2
C3
TE
P7
P6 P8
P
C1
VAL
800
C2
C3
TE
P7
P8
P
C1
0
C2
C3
TE