Table of Contents
Advertisement
Sewing
10
Sewing
10
Operating cycle
.01
10
Error messages
.02
When an error occurs, the text „ERROR" appears on the display together with an error code
and short instructions. An explanation of the error codes can be found in the Chapter 11.07
Error messages on the display.
RESET
10 - 1
The machine must be installed, connected and set up as described in Chapter 8
Installation and Commissioning.
The machine must not be operated without the safety devices 1 to 5, see
Chapter 1.06 Danger warnings! Danger of injury!
3
4
Fig. 10 - 01
Carry out all steps in accordance with Chapter 9 Setting up.
Place the material properly under the work clamp.
Lower the work clamp and start the sewing cycle, see Chapter 7.02 Pedal.
P1
P2
P3
P4
P5
P6
ERROR :
003
RESET
Correct the error.
Acknowledge the correction of the error by pressing the corresponding plus/minus key
or by switching the machine off and on.
1
2
P7
P8
P
C1
C2
C3
TE
5
Advertisement
Table of Contents
