Setting Up The Bobbin Thread Counter - Pfaff 3371-1 series Instruction Manual

Setting up
9

Setting up the bobbin thread counter

.08
●
●
●
●
●
●
9 Resetting the piece counter
.09
In the sewing mode (basic position of the machine) the piece counter or the bobbin thread
counter can be displayed by pressing the menu key. (When the bobbin thread counter is
switched off, the piece counter is displayed - Selection under parameter 004) .
The piece counter counts from 0 onwards and differs from the bobbin thread counter in the
display through the upwards pointing arrow.
●
32
With the machine in its basic position, select the input mode.
With the corresponding +/- key select parameter "004".
If required, enter the access code, see Chapter 11.04.01 Entering the access code.
No
004
With the corresponding +/- key switch on the bobbin thread counter.
With the corresponding +/- key enter the number of workpieces to be sewn.
Conclude the input by pressing the TE key. (Machine changes to the sewing mode).
20
Reset the piece counter with the corresponding +/- keys.
VAL
ON 800
SET 0