Access Codes; Entering The Access Code; Changing The Access Code - Pfaff 3371-1 series Instruction Manual

Input
11

Access codes

.04
The selection of seam patterns, the reservation of the program stations, the input of
sequences and the selection of individual parameter levels can be locked with a 4-figure
access code. The access code can be changed as desired. The factory set access code is
"3371".
11

Entering the access code

.04.01
If, in the input mode, a function is selected, which has an access code, the demand for ente-
ring the access code appears on the display.
TE
11

Changing the access code

.04.02
TE
11 - 4
P4 P5
P1 P2 P3
TE
PINCODE:
3 3 7
Enter the access code with the corresponding plus/minus keys.
Conclude the input.
Once the access code has been entered, all functions with access protection
are freely accessible, until the machine is switched off.
In the input mode, select parameter "811"
Enter the access code, see Chapter 11.04.01 Entering the access code.
P1 P2 P3 P4 P5
TE
No
811
Change the access code with the corresponding plus/minus keys.
Conclude the input.
P6 P7
P8
P
C1
1
C2
C3
TE
P7
P6 P8
P
C1
VAL
3371
C2
C3
TE