Mixer Controls - Novation TWITCH User Manual

English

Mixer Controls

Two sets of mixer controls are provided (for Decks A and B); the following descriptions apply to either.
Deck channel fader – the stereo
19
fader adjusts the level of the deck's
audio sent to the master outputs. It
can also function as FADER FX,
see page 53.
Crossfader – normal crossfade
20
function between the two decks.
Channel bargraph meter – will
21
normally show the Master output
level, but may additionally show
other levels depending on various
switch settings.
TRIM – the input gain trim pot
22
should be adjusted to match the
levels of different tracks, to reduce
the possibility of overload and to
optimise the fader's control range.
HIGH – EQ control providing 6 or
23
12* dB of cut and boost at high
frequencies.
MID – EQ control providing 6 or 12*
24
dB of cut and boost at mid
(e.g., speech) frequencies.
: LOW – EQ control providing 6 or 12* dB of cut and boost at low frequencies.
25
Headphone Cue select
26
monitoring.
: FADER FX – allows sound effects (FX) to be added to the channel. Press to select an
27
effect for the channel, and rotate to adjust the effect parameter (e.g. with Echo selected,
echo time is adjusted). See page
FX ON/OFF – reassigns the Deck channel fader as a FADER FX control. See page 53.
28
* EQ range selectable in SETUP menu.
23
22
24
26
27
28
25
19
21
20
: press to route the Deck to the Cue system for headphone
53.
14