Performance Modes; Cue Points - Novation TWITCH User Manual

English

PErforMancE ModES

TWITCH has eight large, illuminated soft pads
tracks. These Performance Pads can function in several different modes, and the mode is
selected by the HOT CUES

cue Points

You can use cue points in ITCH to mark and trigger different parts of your tracks. The cue point
markers are saved with the file in the track's ID3 tag. This means they will be present each time
you load the track.
HOT CUES is the initial function for the Performance Pads. (Note the HOT CUES button
illuminated when TWITCH is first powered on). Up to eight cue points may be captured "on-the-fly".
To create a cue point, press one of the Performance Pads for the deck. The button will light to show
that a cue point has been set. To delete a cue point hold SHift
for the point you want to delete.
Once a cue point is set, you can jump to it at any time by pressing the relevant Performance Pad.
If playback is paused, recalling a cue point will play from that point as long as the key is held
down; the playhead will return to the cue point when the button is released and the audio will
pause. If you press the H B button while you are holding down the HOT CUE button, playback
will continue when you let both buttons go. This allows you to cue a track from Pause mode and
then continue playback once you know the mix is right.
NOTE: Your cue points are saved to the file and recalled the next time it is loaded. They are not
lost if the file is moved or renamed.
which can be used creatively while playing
45
, SLICER , AUTO LOOP
41 42
and LOOP ROLL
43 43
and press the Performance Pad
48
buttons.
is
41
44