Mic And Aux - Novation TWITCH User Manual

English

Mic and auX

Mic and auX Mixing
TWITCH has inputs for a microphone and an auxiliary stereo line
source. The gain of each input is adjustable at the front and rear panels
respectively,
summed, and their level and equalization is adjustable. The MIC/AUX
signal can be assigned either to the whole Program Mix or either side of
the CROSSFADER.
If the rear panel Direct Monitoring switch
Mic/Aux button
controls are provided, as well as a 13-segment bargraph meter. Click the
routing button to select where the MIC / AUX audio signal will be sent:
• Mix - the signal is sent to the Program Mix, whichever deck is play-
ing.
• X-F A - the signal is mixed with Deck A's audio only.
• X-F B - the signal is mixed with Deck B's audio only
• Mute - The MIC / AUX signal will be muted.
The LEVEL knob
signals before they are sent to ITCH for mixing.
and . The mono Mic signal and stereo Aux signal are
5 10
to open the metering/EQ panel. High, Mid and Low EQ
11
on TWITCH controls the gain for the MIC and AUX
57
is OFF, you can click on the
6
54