Table of Contents
Advertisement
Install the camera
6.2.6
REMOTE
6.2.6.1 ADDRESS
6.2.6.2 PROTOCOL
6.2.6.3 BAUD RATE
6.2.7
PRIVACY ZONE
28
Siemens Building Technologies
Fire Safety & Security Products
Enter REMOTE submenu as shown in the fig-
ure. Using UP/DOWN Key to adjust cursor to
the function which wants to Modify.
Press ENTER key to enter Modify status and
then using UP/DOWN key to select Mode after
selected and then press Enter key to leave
modify status.
Setup camera address volume 0 – 255.
Protocol include Siemens-U, Siemens-B, Siemens-S and MOLYNX-D.
Baud Rate: 2400, 4800, 9600, 19200.
Move the cursor to the position as shown in the
figure.
Press ENTER to turn on the privacy zone mode,
than use UP/DOWN and Left/Right button to
setting zone position, when ok press ENTER
and use UP/DOWN and Left/Right button to
setting zone size and press ENTER to leave
this function.
REMOTE
ADDRESS 1
PROTOCOL SIEMENS-B
BAUD RATE 4800
BACK DEFAULT
MAIN MANU
PRESET INROOM
<CAMERA SETUP>
<D/N SETUP>
<OPTION>
<OTHER SETUP>
<REMOTE>
<PRIVACY ZONE>
BLC ZONE OFF
SYNC MODE INT
EXIT CANCEL DEFAULT
08.2006
Advertisement
Table of Contents
