6.2.5.11 SET ZONE MOVE
6.2.5.12 MOTION TEXT
6.2.5.13 ALARM OUT
6.2.5.14 MOTION DELAY
Siemens Building Technologies
Fire Safety & Security Products
Moving the alarm zone position.
Select the Motion TEXT position, press ENTER
into modify mode as shown in the figure. Using
Left/Right button choose position and use
UP/DOWN button choose text (0 - 9, A - Z) the
max 24 characters.
Use the UP/DOWN button to select 0, 5, 10, 15,
20 sec. For delay of ALARM operate timing as
shown in the figure.
Use the UP/DOWN button to select 0, 5, 10, 15,
20 sec. For delay of Motion ALARM operate
timing as shown in the figure. Alarm will be re-
set automatically after selected time
Install the camera
SET ZONE > < ^ v MOVE
MOTION OFF
MOTION LEVEL LOW
<MOTION AREA>
MOTION TEXT
------------------------------
ALARM OUT OFF
MOTION DELAY 5
BACK
MOTION OFF
MOTION LEVEL LOW
<MOTION AREA>
MOTION TEXT
------------------------------
ALARM OUT OFF
MOTION DELAY 5
BACK
MOTION OFF
MOTION LEVEL LOW
<MOTION AREA>
MOTION TEXT
------------------------------
ALARM OUT OFF
MOTION DELAY 5
BACK
08.2006
27