Table of Contents
Advertisement
Tip
• The limits of time and cost to be displayed
Up to 999 hours 59 minutes and 59 seconds for call time and up to 9,999,999
yen for call cost can be displayed. Time and costs exceeding the limits remains
"999 :59 : 59" and "9999999 yen".
Note
•
Ring time for incoming or outgoing is not counted in the call time/
cost. However, on hold time is counted.
•
The displayed call time and cost are intended as an approximate
guide and may differ from the actual time and costs.
•
When using the Group Talk service (zp.15-7), the combined total
call costs are displayed.
•
When making a call outside Japan, the costs may be included in Call
Duration or Previous Call.
! Guide to the call time and cost
Call Duration shows the total call time and cost from the previous reset to the
latest. Previous Call shows the previous call time and cost.
■ Setting a Limit of Call Costs
If exceeding the total call cost to be set, the notification appears after
ending the call. If exceeding the cost to be set, it is not possible to make a
voice call or video call except for an emergency call.
Setting a Limit
A Press c and select
Settings → Common Set. → CalTim/TolInf →
CallUpLimitSet
B Press M (CHANGE)
C Enter PIN2
D Press M (OK) or #
E Enter the limit for call costs and press M (OK)
Note
•
If the total call costs exceeds the limit to be set while talking
overseas, the call may terminate automatically.
(Settings) → Call
2-11
2
Advertisement
Table of Contents
