Resetting Security Levels; S! Appli Settings; Incoming Settings - SoftBank 705N User Manual

Tip
• Security options
･ Prompt At First Only: A confirmation appears only the first time the
S! Appli is launched.
･ Prompt At Startup: A confirmation appears each time the S! Appli is
18
launched.
･ Prompt Each Time: A confirmation appears each time the connection
function is used.
･ Disable: The function is disabled.
• Pressing M (OPTIONS) does not display Security when using
S! Appli which does not connect to the network.

■ Resetting Security Levels

Reset security settings to default.
A Press c and select
Library
B Highlight S! Appli, press M (Options) and select
Security
C Select Setting Reset
D Press M (YES)
18-6
(S! Appli) → S! Appli

S! Appli Settings

■ Incoming Settings

Set incoming or alarm settings for S! Appli.
[Default] ■Call Priority
A Press c and select
Set. → Incoming Call
B Select Call Priority or Alert Display
! When a call is incoming or the alarm time has come during
S! Appli running
• Call Priority is selected
S! Appli is paused, and the phone rings or the alarm sounds.
• Alert Display is selected
When Alert Display is set
The S! Appli continues running, and a message appears at the top of the display
indicating that a call is incoming or the alarm time has come. To answer an
incoming call, press n. Answering a call pauses S! Appli and it comes back
after ending the call.
To end S! Appli before answering an incoming call, press p, select End and
press n.
(S! Appli) → S! Appli