Specifications; Maintenance - IDEAL 61-340 Instruction Manual

ND 6447-1 61-340 61-342 Ins 3/17/08 6:42 AM
Resistance (Ω) AC/DC Current (A
Toggle for
Hz
DC
MΩ
Toggle for
AC
Turn power off, break circuit, insert meter in
series, then turn power back on.
WARNING: De-energize circuit before
taking resistance measurement.
WARNINGS:
• Check fuse for continuity before testing.
Capacitance ( )
• Use the proper switch position and lead
inputs.
Toggle for
• Never attempt to measure current on
circuits or equipment with more than
600 volts potential.
• Duty cycle: 15sec ON / 15min OFF for
nF
10A MAX
Audible Continuity (
Ω
WARNING: De-energize circuit and
discharge capacitor before taking capaci-
tance measurement.
Measuring time: < 15sec for <400µF
WARNING: De-energize circuit first.
< 1min for <4000µF
Page 8
~
) Diode Test ( )
Bad Diode
Reverse Open Shorted
Toggle for
A
Good Diode
Foward Reverse
WARNING: De-energize circuit before
checking diode.
Temperature
Toggle for
°C
)
)
• )
)
Toggle for
)
• ) )
Closed Open
Circuit Circuit
WARNING: To avoid electric shock, do
not place test leads or thermocouple on a
voltage source.
Frequency (Hz) /
Data Hold
Duty Cycle(%)
Toggle for
Hold
Duty Cycle
Hz
Min/Max
MAX MIN
Relative Mode
~
Note: On noisy circuits, turn dial to V, then
toggle Hz button.
Battery & Fuse Replacement
Backlight
(Remove tilt stand)
Range
WARNING: To avoid electric shock, dis-
connect test leads before removing battery cover.
WARNING: For continued protection
against fire, replace only with fuses of the speci-
fied voltage, current and rupture speed ratings.

Specifications

General Features
Display: 3999 Count LCD / 3-3/4 Digit
Press to hold
Refresh Rate: 2.5x/sec.
present value in
Over range: "OL" is displayed
display; depress to
Polarity: Automatic (no indication for
release display.
positive polarity); Minus(-) sign
for negative polarity
True-RMS: 61-342 only.
Auto Power Off: After 10 minutes of non-use
Low Battery: is displayed if battery voltage
+
drops below operating voltage
Altitude: 6561.7 ft. (2000m)
Toggle for
Accuracy: Stated accuracy at 73° ±41°F
Min/Max
(23° ±5°C), < 75% R.H.
Hold for >1sec.
Batteries: 9VDC NEDA 1604
to exit mode.
Battery Life: 200 hrs. (61-340)
150 hrs. (61-342)
Fuse: 0.5A/500V (#F-340)
10A/1000V (#F-341)
Operating 32° to 104°F (0° to 40°C)
environment: at < 75% R.H.
Storage -4° to 140°F (-20° to 60°C)
environment: at < 80% R.H.
Toggle for
Weight: 13.6 oz (386g)
Relative Mode
Size: 7.0"H x 3.5"W x 1.9"D
(177mmHx89mmWx48mmD)
Press to deduct
Accessories Test leads (TL-310), 9V battery,
reference value;
Included: Operating Instructions
depress to exit
Safety Complies with UL/IEC/EN 61010-1,
mode.
Certification: 61010-031, Cat III-600V
C US
N12966
Equipment protected by double
Press >1 sec.
insulation.
for backlight ( )
Instrument has been evaluated and complies with
Backlight stays
insulation category III (overvoltage category III) for
illuminated for
measurements performed in the building installation.
10 sec.
Pollution degree 2 in accordance with IEC-644.
Indoor use.
Toggle to manual
range on following
functions: Volts,
Ohms, Amps.
Hold for >1sec. to
exit mode.

Maintenance

Clean the case with a damp cloth and mild deter-
gent. Do not use abrasives or solvents.
Service and Replacement
Parts
No user-serviceable parts.
For replacement parts or to inquire about service
information contact IDEAL INDUSTRIES, INC. at
1-877-201-9005 or visit our website @
www.testersandmeters.com.
Warranty Statement
This tester is warranted to the original purchaser
against defects in material and workmanship for
two years from the date of purchase. During this
warranty period, IDEAL INDUSTRIES, INC. will, at
its option, replace or repair the defective unit, sub-
ject to verification of the defect or malfunction.
This warranty does not cover fuses, batteries or
damage from abuse, neglect, accident, unautho-
rized repair, alteration, or unreasonable use of the
instrument.
Any implied warranties arising out of the sale of an
IDEAL product, including but not limited to implied
warranties of merchantability and fitness for a par-
ticular purpose, are limited to the above. The man-
ufacturer shall not be liable for loss of use of the
instrument or other incidental or consequential
damages, expenses, or economic loss, or for any
claim or claims for such damage, expenses or eco-
nomic loss.
State laws vary, so the above limitations or exclu-
sions may not apply to you. This warranty gives
you specific legal rights, and you may also have
other rights which vary from state to state.