Resistance (Ω); Specifications; Maintenance - IDEAL 61-340 Instruction Manual

DC
MΩ
AC/DC Current (A
Resistance (Ω)
Toggle for
Hz
DC
MΩ
Toggle for
AC
Turn power off, break circuit, insert meter in
series, then turn power back on.
WARNING: De-energize circuit before
taking resistance measurement.
WARNINGS:
nF
• Check fuse for continuity before testing.
Capacitance ( )
• Use the proper switch position and lead
inputs.
Toggle for
• Never attempt to measure current on
circuits or equipment with more than
600 volts potential.
• Duty cycle: 15sec ON / 15min OFF for
nF
10A MAX
Audible Continuity (
Ω
WARNING: De-energize circuit and
discharge capacitor before taking capaci-
tance measurement.
Measuring time: < 15sec for <400µF
WARNING: De-energize circuit first.
< 1min for <4000µF
A
Good Diode
~
) Diode Test ( Foward ) Reverse
Bad Diode
Good Diode
CAT II
300V
MAX
Foward Toggle for Reverse Open Shorted
CAT II
A
300V
MAX
Good Diode
Foward Reverse
WARNING: De-energize circuit before
checking diode.
Temperature
Toggle for
°C
Ω
)
• )
) )
Closed Open
Toggle for
Circuit Circuit
)
• )
)
Closed Open
Circuit Circuit
WARNING: To avoid electric shock, do
not place test leads or thermocouple on a
voltage source.
Bad Diode
Frequency (Hz) /
Data Hold
Duty Cycle(%)
Open Shorted
Toggle for
Hold
Duty Cycle
Hz
Min/Max
MAX MIN
Good Diode
Foward Reverse
Relative Mode
CAT II
300V
~
MAX
Note: On noisy circuits, turn dial to V, then
toggle Hz button.
Battery & Fuse Replacement
Backlight
(Remove tilt stand)
Range
WARNING: To avoid electric shock, dis-
connect test leads before removing battery cover.
WARNING: For continued protec-
tion against fire, replace only with fuses of the
specified voltage, current and rupture speed rat-
ings.

Specifications

General Features
Display: 3999 Count LCD / 3-3/4 Digit
Press to hold
Refresh Rate: 2.5x/sec.
present value in
Over range: "OL" is displayed
display; depress to
Polarity: Automatic (no indication for
release display.
positive polarity); Minus(-) sign
for negative polarity
True-RMS: 61-342 only.
Auto Power Off: After 10 minutes of non-use
Low Battery: is displayed if battery voltage
+
drops below operating voltage
Altitude: 6561.7 ft. (2000m)
Toggle for
Accuracy: Stated accuracy at 73° ±41°F
Min/Max
(23° ±5°C), < 75% R.H.
Hold for >1sec. Batteries: 9VDC NEDA 1604
Battery Life: 200 hrs. (61-340)
to exit mode.
150 hrs. (61-342)
Fuse: 0.5A/500V (#F-340)
10A/1000V (#F-341)
Operating 32° to 104°F (0° to 40°C)
environment: at < 75% R.H.
Storage -4° to 140°F (-20° to 60°C)
environment: at < 80% R.H.
Toggle for Weight: 13.6 oz (386g)
Relative Mode Size: 7.0"H x 3.5"W x 1.9"D
(177mmHx89mmWx48mmD)
Press to deduct
Accessories Test leads (TL-770), 9V battery,
reference value;
Included: Operating Instructions
depress to exit
Safety Complies with UL/IEC/EN 61010-1,
mode.
Certification: 61010-031, Cat III-600V
N12966
Equipment protected by double
Press >1 sec.
insulation.
for backlight ( )
Instrument has been evaluated and complies with
Backlight stays
insulation category III (overvoltage category III) for
illuminated for
measurements performed in the building installa-
10 sec.
tion. Pollution degree 2 in accordance with IEC-644.
Indoor use.
Toggle to manual
range on following
functions: Volts,
Ohms, Amps.
Hold for >1sec. to
exit mode.

Maintenance

Clean the case with a damp cloth and mild deter-
gent. Do not use abrasives or solvents.
Service and Replacement
Parts
No user-serviceable parts.
For replacement parts or to inquire about service
information contact IDEAL INDUSTRIES, INC. at
1-877-201-9005 or visit our website @ www.
idealindustries.com.
Warranty Statement
This tester is warranted to the original purchaser
against defects in material and workmanship for
two years from the date of purchase. During this
warranty period, IDEAL INDUSTRIES, INC. will, at
its option, replace or repair the defective unit, sub-
ject to verification of the defect or malfunction.
This warranty does not cover fuses, batteries or
damage from abuse, neglect, accident, unauthor-
ized repair, alteration, or unreasonable use of the
instrument.
Any implied warranties arising out of the sale of
an IDEAL product, including but not limited to
implied warranties of merchantability and fitness for
a particular purpose, are limited to the above. The
manufacturer shall not be liable for loss of use of
the instrument or other incidental or consequential
damages, expenses, or economic loss, or for any
claim or claims for such damage, expenses or
economic loss.
State laws vary, so the above limitations or exclu-
sions may not apply to you. This warranty gives
you specific legal rights, and you may also have
other rights which vary from state to state.