Table of Contents
Advertisement
5
Press4(Erase Data), and use
Hto select "Erase" or "Not
Erase" data, and pressC(OK).
6
Press5(Release Phone Lock),
and useHto select "Valid" or
"Invalid", and pressC(OK).
7
Press6(Caller ID List), and
pressC(Edit). Enter a phone
number, and pressC(Reg).
Note
・If setting "Erase Data" to "Erase", a memory in the W61PT will be erased
when remote auto lock is activated.
・If setting "Release Phone Lock" to "Valid", pressing any key while remote
auto lock is active displays the unlock screen.
Enter "Lock No." in this screen to release the remote ctrl lock.
When setting it to "Invalid", no unlock screen is displayed. To unlock the key,
make a call to the W61PT using same conditions as before or use Security
Lock Service (→P81).
80
Advertisement
Table of Contents
