Entering Pictograph, Emoticon and Symbol
1
PressingNon the character
input screen switches the input
type by Pictograph -> Emoticon ->
Two-byte Symbol -> One-byte
Symbol mode in order.
2
UseKto select a desired
character and pressC(Select).
The selected character is inserted to
the input screen.
PressingI(Repeat) instead ofC(Select)
repeats same character continuously.
Note
Press*and#to switch between the Pictograph and Emoticon
・
mode.
Pictograph may not be displayed properly if the receiver does not
・
have an au phone.
39