How To Charge The Battery - Pantech W61PT User Manual

How to Charge the Battery

The battery Pack is not fully charged at the time of purchase.
Charge the battery Pack before using your W61PT for the first time.
1
Directly insert the Common AC Adapter 01 (optional in this pack-
age) into the Desk Folder (included).
2
Plug the power plug of the common AC Adapter 01 into a power
outlet (household AC 100V).
※The illustration below may vary depending on an AC adapter.
3
Insert the W61PT into the desktop holder.
E
・Charging: Red light is on
・Completed: Light is off
・When charging is completed, please remove the
Note
・The common AC Adapter 01 is not included in this package. Please note
that connection image above is for your reference only and it may vary
depending on the AC adapter used.
・When you connect or disconnect the common AC Adapter 01 (optional),
please ensure it is parallel against the connection terminal of the desktop
holder.
12
Battery LED
Power
Terminal
Desktop Holder
connector from the W61PT.
Common AC Adapter 01
Q
Common
AC Adapter 01
AC100
Power Outlet
W
Power LED