Olivetti d-COLOR MF 282 Maintenance Manual page 24

3
- If an Drum Unit other than for black has reached the replacement time, printing can be continued for-
cibly using black. Tap [Continue], and then select a desired print job.
- After replacing an Drum Unit, be sure to clean the Print Head Glass for each color. For details on how
to clean the Print Head Glass, refer to [User's Guide: Troubleshooting].
7 CAUTION
Handling toner and Drum Unit
- Do not throw an Drum Unit into a fire. Doing so may cause hot toner to spray in all directions, which
may cause burn injuries.
- Be careful not to get the inside of the machine, your clothes, or hands dirty with toner.
- If any toner does get on your hand, wash it off using water or neutral detergent.
- If any toner gets into your eyes, immediately wash it out with water and consult your doctor.
3-10
Replacing a Drum Unit
d-Color MF552/452/362/282/222
3.3