Table of Contents
Advertisement
POS-X : Adjust the window X-Axis position
POS-Y : Adjust the window Y-Axis position
SIZ-X : Adjust the window X-Axis size
SIZ-Y : Adjust the window Y-Axis size
* ACE and DEFOG should be off while WDR mode is on.
8. DY&NIGHT : Select Day&Night
1) D&N
-AUTO / DAY / NIGHT / EXT
Delay : 0 ~ 255 seconds
BURST : OFF / ON
THRS : (LOW / MIDDLE / HIGH)
According to daytime, nighttime setting the levels of transition
sets to no changes when it is dark at, higher the step it is set to
GAP : LOW / MIDDLE / HIGH
This setting adjusts the margin of change from the setting
of light to dark /daytime to nighttime and dark to light / nighttime
to daytime. If this setting is too low then fluctuation may occur.
2) IR CDS Model
-AUTO / DAY / NIGHT
Delay : ---
BURST : OFF / ON
THRS : ---
GAP : ---
Advertisement
Table of Contents
