Advertisement
Quick Links
Advertisement
Related Manuals for Beta 350-498 RR
Summary of Contents for Beta 350-498 RR
- Page 1 2013 – 2014 350-498 RR Set Up Manual 8/2013...
- Page 2 4) Remove additional items from 1) Remove cardboard from the box supplied. Item list is as crate. Remove bag with bolts follows: and upper handle bar clamp -Headlight assembly taped to the protective -Skid plate covering over the seat. -Frame guards Remove all items from bottom -Tool kit of crate...
- Page 3 7) Attach the computer using the 10) Install the headlight mask bottom bolts located on the top triple by inserting the lower tab into slot clamp. Torque to 10nm. located in the front fender brace. 11) Finish by securing the rubber 8) Insert all the electrical straps located on the sides of the connectors into the matching plugs...
- Page 4 13) Locate the skid 16) Install the right and left frame guards with zipties and the one bolt plate and install the four foam buffers as into the swingarm pivot. Make sure there is one ziptie tied around the shown. rear brake master cylinder also.
- Page 5 19) Line up the cells on the 22) Congratulations! You have just set up container with the holes on the a new Beta! top of the battery. Push down to puncture the foil covers . Follow the checklist on the customer’s...
Need help?
Do you have a question about the 350-498 RR and is the answer not in the manual?
Questions and answers