Changing Grinding Tools - HTC 650 HDX User Manual

Usage
Figure 4-10 Locking grinding tools

4.5.2. Changing grinding tools

1.
Figure 4-11 Removing grinding tools
2.
22
Remove the grinding tool by giving it a few light taps
with a rubber hammer so the locking mechanism releases,
see Figure 4-11 on page 22. Then draw the tool up out
of the guide slot.
Slide the grinding tool diagonally, from above, down into
the appropriate guide slot on the tool holder, see Figure
4-9 on page 21. Then push the tool fully into the guide
slot.
HTC 650 HDX
1.0