Changing Grinding Tools - HTC 400 DS User Manual

HTC 400 DS
Figure 4-2 Fitting grinding tools
2.
Figure 4-3 Locking grinding tools

4.4.2. Changing grinding tools

1.
2.0
Lock the grinding tool into the tool holder by giving
it a few light taps with a rubber hammer, see Figure
4-3 on page 17.
Remove the grinding tool by giving it a few light taps
with a rubber hammer so the locking mechanism releases,
see Figure 4-4 on page 18. Then draw the tool up out of
the guide slot.
Operation
17