Preparations For Dry Grinding; Preparations For Wet Grinding - HTC 650 HDX User Manual

HTC 650 HDX
3.

4.6. Preparations for dry grinding

Warning!
Check that the splash guard is fitted.
1.
Note!
The dust extractor's suction hose must be connected to the
appropriate socket on the machine. Adjust the dust extractor to
match the grinder's capacity.
2.
3.
4.

4.7. Preparations for wet grinding

Warning!
Check that the splash guard is fitted.
1.
Tip!
Never use a dust extractor, as blockages may develop in the dust
extractor's suction hose and filter.
1.0
Lock the grinding tool into the tool holder by giving
it a few light taps with a rubber hammer - see Figure
4-10 on page 22.
Connect a dust extractor to the machine. For dust extractor
models, see under the Suction System tab in the HTC
Product Catalogue.
Inspect the floor carefully and remove any objects sticking
up, such as reinforcement rods or bolts, and any debris that
could get caught in the machine.
Attach the appropriate tool to the machine, see
under Fitting grinding tools on page 21.
Set the handle to the working position, see Figure
4-2 on page 17.
Always use wet suction when wet grinding.
Usage
23