Monitor Connection - Sanyo VCC-ZMN600P Installation Manual

Digital Video
Recorder etc.
Power Supply Connection
b With AC 24 V
GND GND
~ ~
~ ~
For the connections, use cables thicker
than 18 AWG.
b With DC 12 V
Check that +/- polarity is correct.
– –
+ +
For the connections, use cables thicker
than 18 AWG.
Color or Black-and-White Setting
The alarm input terminals can
also be used as terminals for
switching between color and
black/white video modes using
an external switch.
Shielded LAN cable
See "Connection when Using PoE Power Supply" or "Connection
when Not Using PoE Power Supply".
Open: Color
Close: Black/White
SYNC
INT
CAMERA 1
LENS
SET
ALARM SET
PRIVACY MASK SET
PASSWORD SET
LANGUAGE SET
OPTION SET

Monitor Connection

• Using different cables from those
specified here may attenuate the
video and/or sync signals and
interfere with correct transmission.
• RG-59U coaxial cables can be
used when distance between
devices is short, but not in duct or
aerial routing.
Cable type
RG-59U (3C-2V)
RG-6U (5C-2V)
RG-11U (7C-2V)
(COM)
(ALARM IN 1 or 2)
GAMMA 0.45
MOTION OFF
y
POSITION OFF
y
DAY/NIGHT COLOR
y PRESET OFF
y
MENU BACK
y
y
y Make sure that
COLOR is selected.
8
Length
250 m (273 yds) max.
500 m (547 yds) max.
600 m (656 yds) max.
D/N SETTING-COLOR
EXT ALARM 1
y
1: ALARM IN 1 terminal
2: ALARM IN 2 terminal