Monitor Connection; Power Supply Connection - Sanyo VDC-DP7585P Installation Manual

Connections
Do not connect the power cord until all other connections have been completed.
RG-6U, 300 m max.

Monitor Connection

For the connection, use a RG-6U coaxial
cable.
• Using different cables from those
specified here may attenuate the
video and/or sync signals and
interfere with correct transmission.
• RG-59U coaxial cables can be
used when distance between
devices is short, but not in duct or
aerial routing.
Cable type
RG-59U (3C-2V)
RG-6U (5C-2V)
RG-11U (7C-2V)
BNC type
Length
150 m max.
300 m max.
350 m max.
5
DC12 AC24
RED
BLACK
WHITE
YELLOW DAY/NIGHT
PURPLE
ORANGE
BLUE
GRAY
To prevent electromagnetic
interference
• On the cable for power supply
Be sure to attach the supplied clamping
core to the cables as illustrated.

Power Supply Connection

b With AC 24 V
(RED)
(BLACK)
(WHITE)
For the connections, use cables thicker than
18 AWG.
b With DC 12 V
Check that +/- polarity is correct.
(RED)
(BLACK)
For the connections, use cables thicker than
18 AWG.
+ ~
– ~
GND
ALARM IN
TELE
WIDE
COMMON
~
~
GND
+
–