Table of Contents
Advertisement
Pivot and hardware torque values
PIVOT MAINTENANCE
The pivots and bearings on SCOTT Voltage FR 700 are extremely easy to maintain.
An external treatment with a grease spray after every bike wash is all that is needed.
We do not recommend heavy grease sprays as these leave a film on the parts which
is difficult to remove. We also recommend the same for the chain.
ATTENTION!
We strongly recommend going to your local SCOTT dealer if the swingarm requires
repair or assembly/disassembly in order to avoid injuries and damage caused by
incorrect set-up.
Should you choose to order a bearing service tool kit or a kit with all necessary
bearings, these are available to order at your local SCOTT dealer using the SCOTT
article numbers below. Alternatively, order from a hardware store using the bearing
information in the Geometry/Tech Data section of this manual.
14
VOLTAGE FR | BIKE OWNER'S MANUAL 2015
FRONT FORK SET-UP/CHANGE OF FRONT FORK
For the set-up of the front fork please use the fork specific manual attached to
the bike.
The recommended Fork lengths for the SCOTT Voltage FR 700 are:
Wheel sizes
Front fork length range
27.5"
586mm / 560mm
26"
586mm / 565mm
BIKE OWNER'S MANUAL 2015 |
Max fork offset
Accepted fork travel range
52mm
203mm/170mm
52mm
203mm/180mm
VOLTAGE FR
15
Advertisement
Table of Contents
