VOLTAGE FR CONCEPT GEOMETRY/TECHNICAL DATA VOLTAGE FR 700 Voltage FR 700 is the result of years of research and development searching for one Sizes S, M and L of the most versatile, durable and affordable gravity bikes available on the market,...
ADJUSTABLE REAR TRAVEL REAR SUSPENSION SET-UP VOLTAGE FR 700 Depending on the different models of Voltage FR you’ll find the shock mounted at The Set-Up of the rear shock can be easily done within a few minutes. 2 different positions that will provide 2 different suspension travels to the frames Please take this time to avoid dangerous riding performance and to get the best without changing seat/headtube-angles or riding position on the bike.
To check this, release the air/remove the coil, install the shock and compress the Please make sure to mount the rear shock of your SCOTT Voltage FR 700 always as shock completely. shown in the picture below (piggy back in the “Top/Bottom” position).
IDS DROP OUT SYSTEM Voltage FR 700 is compatible with 31.6mm diameter seat post and 34.9mm The Voltage FR 700 offers the possibility not only to change drop out hanger in Seatclamp diameter. case of damage, you also can choose between different drop outs of the SCOTT IDS (Interchangeable Drop-Out System): Please note that maximum insertion is 120mm Maximum.
For thru axle hubs – 12mm axle. Use only SCOTT provided axle. 4 x 6902 2RS For nutted hubs – 12mm nutted axle. Please contact your local SCOTT dealer for supply of those parts in case you want to re-fit your bike with one of those versions. REAR BRAKE MOUNT STANDARD IS rear brake mount.
203mm/180mm PIVOT MAINTENANCE The pivots and bearings on SCOTT Voltage FR 700 are extremely easy to maintain. An external treatment with a grease spray after every bike wash is all that is needed. We do not recommend heavy grease sprays as these leave a film on the parts which is difficult to remove.
CABLE ROUTING Rear Triangle Routing: Internal gear routing through right seat stay via entry just after link and exit just before drop out. Mainframe Routing: External for both gear and brake via 3 cable guides. Cables exit mainframe under link. Brake external along seat stay via 3 cable guides | 16 ENGLISH...
This warranty covers defects in materials and workmanship at the time of transfer of risks To make a claim under this limited warranty, you must notify SCOTT of the claimed defect in frames, swingarms and forks (provided it is a fork of SCOTT) on SCOTT branded bikes within the warranty period and timely return the Product to SCOTT at your expense for sold completely assembled by SCOTT or an authorized SCOTT dealer (“Product”).