Replaceable Dropout; Rear Disc Brake Mount; Front Fork Set-Up/Change Of Front Fork; Pivot Maintenance - Scott Genius LT Series User Manual

•

REPLACEABLE DROPOUT

On Genius LT bikes of model year 2013 you can replace the rear derailleur hanger.
Depending on the different models you'll find following options:
1. 142mm axle with RWS 142/12
This is available via the SCOTT distribution:
219574 complete set of RWS 142/12
219577 right side replaceable RD hanger
2. 135mm axle with RWS 135/5
This is available via the SCOTT distribution:
219572 complete set of RWS 135/5
219575 right side replaceable RD hanger
3. Regular 135mm rear axle with QR
This is available via the SCOTT distribution:
206473 replaceable hanger
If you want to use another RWS standard SCOTT also offers after-market parts for specific
wheelsets for the following parts via the SCOTT distribution:
219574 RWS 135/12 parts set
219576 right side replaceable RD hanger
•

REAR DISC BRAKE MOUNT

Genius LT can be used with 3 different disc
rotor sizes on the rear brake.
The rear disc brake on Genius LT is
Postmount (PM) Standard on the left
seatstay and it is possible to use disc rotors
with 180, 185 and 200mm diameter.
Please note that for the assembly of 185 and
200mm rotors you might need adapters/
washers between the PM port on the frame
and the brake calliper.
| 28 ENGLISH
GENIUS LT | 2016 BIKE USER MANUAL
For 185mm rotor diameter you will need 2 red anodized spacers that can be ordered via the
SCOTT distribution with:
219568 Brake Mount Adapt Spacers 4mm f/185mm
For the 200mm rotors please use for: SRAM/Avid: "+20mm" adapter
Shimano: F180PP2
•

FRONT FORK SET-UP/CHANGE OF FRONT FORK

For the set up of the front fork please use the fork specific manual attached to the bike.
We recommend using front forks with a travel of 170mm (700) and 160mm (Plus) as this will
not influence the geometry and alter handling of the bike.
For details on the technical length of the recommended forks please refer to the Tech Info
Chart before mentioned.
•

PIVOT MAINTENANCE

The pivot and bearings on SCOTT Genius LT are extremely easy to maintain.
An external treatment with a grease spray after every bike wash is all you have to do. We
do not recommend heavy grease sprays since these will leave a film on the parts which is
difficult to remove. We recommend the same for the chain also.
If you have to change the bearings you can order them included in a service kit at your local
SCOTT dealer or buy them with international parts number as shown above in the specs list
in a hardware store.
In case of a change of the bearings or of the rear swingarm you should contact your local
SCOTT dealer as you need special tools for disassembly and assembly.
2016 BIKE USER MANUAL | GENIUS LT
ENGLISH 29 |